Xinwei drying equipment description

Name: Chain Type Drying Box Air Duct

1. One-stage three-layer mud-coating drying box, with a length of 20 meters and a width of 6 meters (height 2.2 meters-1.6 meters), a power 3 kW speed-adjusting motor. One QZ205 reducer, 5 hot-air circulation type No. 6 fans with 1.5 kilowatts, and heat-conducting oil heating.
2. One section of the spray-paint drying box is a single-layer drying, with a length of 25 meters and a width of 6 meters (2 meters—1.4 meters in height) with a 3 kilowatt speed-adjusting motor. One V set of QZ205 reducer, five hot-air circulation type No. 6 fans with 1.5 kilowatts.

Main features:
HLT—5 series of special drying oven for mud coating, the outer shell is made of imported color steel plate, the inner wall is welded by section steel and imported color steel plate, the inner and outer plates are filled with new-type rock wool insulation material, and the radiating pipe profile frame axial flow air box in the oven Body, hot air circulation drying tunnel, natural moisture exhaust and control box.

Main performance:
1. Adopting rotary heating heat energy conversion, heat conduction oil heating device radiator pipe, chain axial flow fan and other parts are composed of high efficiency and energy saving, and high heat energy conversion rate.
2. The chain drying oven has short drying cycle, low cost, uniform drying and good effect, which solves the defects of internal cracks, fractures, deformation, and discoloration that occur during the drying process.
3. Reduce labor, reduce labor intensity, and improve product efficiency.
4. The HLT series of special drying equipment can dry coated boards of various specifications and purposes.
5. It has the advantages of high efficiency, energy saving, safety and reliability, good drying quality, and low drying cost. It is widely used in large, medium and small door liners, skirting lines, blinds, etc... Wood coating processing enterprises, especially suitable for manufacturers operating wooden products export business.
6. Under the action of the circulating fan, the high temperature hot air is transported to the air drying box to dry the coated products.
7. According to the requirements of the drying process, heat energy can be input into the oven at the right time, and the temperature can be controlled by the control system, so as to achieve the purpose of drying both the inside and outside of the coating material at the same time, which greatly improves the yield of high-quality coatings and improves the company. Increased operating efficiency.

Model Oven temperature Outer wall Inner wall Insulation material Oven size
HLD-5T 40-65 degrees
Adjustable imported color
Coated board imported color
Coated board Rock wool board or polyurethane foam 20 meters * 6 meters (2.2 meters * 1.6 meters)
HLD-10Q 30—45 degrees
Adjustable imported color
Coated board imported color
Coated board Rock wool board or polyurethane foam 25m*6m (2m*1.4m)
HLD-15T 40-65 degrees
Adjustable imported color
Coated board imported color
Coated board Rock wool board or polyurethane foam 30m*6m (2m*1.4m)
HLD-20T 40-65 degrees
Adjustable imported color
Coated board imported color
Coated board Rock wool board or polyurethane foam 40 meters * 6 meters (2 meters * 1.4 meters)
1. The above dimensions are for reference only, and can be customized according to customer requirements.
2. The above data size is subject to change without notice.